Configuration¶

Mopidy has a lot of config values you can tweak, but you only need to change a few to get up and running. A complete ~/.config/mopidy/mopidy.conf may be as simple as this:

[mpd]
hostname = ::

[spotify]
username = alice
password = mysecret

Mopidy primarily reads config from the file ~/.config/mopidy/mopidy.conf, where ~ means your home directory. If your username is alice and you are running Linux, the config file should probably be at /home/alice/.config/mopidy/mopidy.conf. You can either create the configuration file yourself, or run the mopidy command, and it will create an empty config file for you and print what config values must be set to successfully start Mopidy.

If running Mopidy as a service, the location of the config file and other details documented here differs a bit. See Running as a service for details about this.

When you have created the configuration file, open it in a text editor, and add the config values you want to change. If you want to keep the default for a config value, you should not add it to the config file, but leave it out so that when we change the default value in a future version, you won't have to change your configuration accordingly.

To see what's the effective configuration for your Mopidy installation, you can run:

mopidy config

This will print your full effective config with passwords masked out so that you safely can share the output with others for debugging.

You can find a description of all config values belonging to Mopidy's core below, together with their default values. In addition, all extensions got additional config values. The extension's config values and config defaults are documented on the extension pages.

Default configuration¶

This is the default configuration for Mopidy itself. All extensions bring additional configuration values with their own defaults.

[core]
cache_dir = $XDG_CACHE_DIR/mopidy
config_dir = $XDG_CONFIG_DIR/mopidy
data_dir = $XDG_DATA_DIR/mopidy
max_tracklist_length = 10000
restore_state = false

[logging]
verbosity = 0
format = %(levelname)-8s %(asctime)s [%(process)d:%(threadName)s] %(name)s\n  %(message)s
color = true
config_file =

[audio]
mixer = software
mixer_volume =
output = autoaudiosink
buffer_time =

[proxy]
scheme =
hostname =
port =
username =
password =

Core config section¶

core/cache_dir¶

Path to base directory for storing cached data.

Mopidy and extensions will use this path to cache data that can safely be thrown away.

If your system is running from an SD card, it can help avoid wear and corruption of your SD card by pointing this config to another location. If you have enough RAM, a tmpfs might be a good choice.

When running Mopidy as a regular user, this should usually be $XDG_CACHE_DIR/mopidy, i.e. ~/.cache/mopidy.

When running Mopidy as a system service, this should usually be /var/cache/mopidy.

core/config_dir¶

Path to base directory for config files.

When running Mopidy as a regular user, this should usually be $XDG_CONFIG_DIR/mopidy, i.e. ~/.config/mopidy.

When running Mopidy as a system service, this should usually be /etc/mopidy.

core/data_dir¶

Path to base directory for persistent data files.

Mopidy and extensions will use this path to store data that cannot be be thrown away and reproduced without some effort. Examples include Mopidy-Local's index of your media library and Mopidy-M3U's stored playlists.

When running Mopidy as a regular user, this should usually be $XDG_DATA_DIR/mopidy, i.e. ~/.local/share/mopidy.

When running Mopidy as a system service, this should usually be /var/lib/mopidy.

core/max_tracklist_length¶

Max length of the tracklist. Defaults to 10000.

The original MPD server only supports 10000 tracks in the tracklist. Some MPD clients will crash if this limit is exceeded.

core/restore_state¶

When set to true, Mopidy restores its last state when started. The restored state includes the tracklist, playback history, the playback state, the volume, and mute state.

Default is false.

Audio configuration¶

These are the available audio configurations. For specific use cases, see Advanced audio setups.

audio/mixer¶

Audio mixer to use.

The default is software, which does volume control inside Mopidy before the audio is sent to the audio output. This mixer does not affect the volume of any other audio playback on the system. It is the only mixer that will affect the audio volume if you're streaming the audio from Mopidy through Shoutcast.

If you want to disable audio mixing set the value to none.

If you want to use a hardware mixer, you need to install a Mopidy extension which integrates with your sound subsystem. E.g. for ALSA, install Mopidy-ALSAMixer.

audio/mixer_volume¶

Initial volume for the audio mixer.

Expects an integer between 0 and 100.

Setting the config value to blank leaves the audio mixer volume unchanged. For the software mixer blank means 100.

audio/output¶

Audio output to use.

Expects a GStreamer sink. Typical values are autoaudiosink, alsasink, osssink, oss4sink, pulsesink, and shout2send, and additional arguments specific to each sink. You can use the command gst-inspect-1.0 to see what output properties can be set on the sink. For example: gst-inspect-1.0 shout2send

audio/buffer_time¶

Buffer size in milliseconds.

Expects an integer above 0.

Sets the buffer size of the GStreamer queue. If you experience buffering before track changes, it may help to increase this, possibly by at least a few seconds. The default is letting GStreamer decide the size, which at the time of this writing is 1000.

Logging configuration¶

logging/verbosity¶

Controls the detail level of the logging.

Ranges from -1 to 4. Defaults to 0. Higher value is more verbose.

-1 is equivalent to mopidy -q.
0 is equivalent to mopidy.
1 is equivalent to mopidy -v.
2 is equivalent to mopidy -vv.
3 is equivalent to mopidy -vvv.
4 is equivalent to mopidy -vvvv.

logging/color¶: Whether or not to colorize the console log based on log level. Defaults to true.

logging/format¶

The message format used for logging.

See the Python logging docs for details on the format.

logging/config_file¶: Config file that overrides all logging config values, see the Python logging docs for details.

loglevels/*¶: The loglevels config section can be used to change the log level for specific parts of Mopidy during development or debugging. Each key in the config section should match the name of a logger. The value is the log level to use for that logger, one of trace, debug, info, warning, error, or critical.

logcolors/*¶: The logcolors config section can be used to change the log color for specific parts of Mopidy during development or debugging. Each key in the config section should match the name of a logger. The value is the color to use for that logger, one of black, red, green, yellow, blue, magenta, cyan or white.

Proxy configuration¶

Not all parts of Mopidy or all Mopidy extensions respect the proxy server configuration when connecting to the Internet. Currently, this is at least used when Mopidy's audio subsystem reads media directly from the network, like when listening to Internet radio streams, and by the Mopidy-Spotify extension. With time, we hope that more of the Mopidy ecosystem will respect these configurations to help users on locked down networks.

proxy/scheme¶: URI scheme for the proxy server. Typically http, https, socks4, or socks5.

proxy/hostname¶: Hostname of the proxy server.

proxy/port¶: Port number of the proxy server.

proxy/username¶: Username for the proxy server, if needed.

proxy/password¶: Password for the proxy server, if needed.

Extension configuration¶

Each installed Mopidy extension adds its own configuration section with one or more config values that you may want to tweak. For the available config values, please refer to the docs for each extension. Most, if not all, can be found at Extensions.

Mopidy extensions are enabled by default when they are installed. If you want to disable an extension without uninstalling it, all extensions support the enabled config value even if it isn't explicitly documented by all extensions. If the enabled config value is set to false the extension will not be started. For example, to disable the Spotify extension, add the following to your mopidy.conf:

[spotify]
enabled = false

Adding new configuration values¶

Mopidy's config validator will validate all of its own config sections and the config sections belonging to any installed extension. It will raise an error if you add any config values in your config file that Mopidy doesn't know about. This may sound obnoxious, but it helps us detect typos in your config, and to warn about deprecated config values that should be removed or updated.

If you're extending Mopidy, and want to use Mopidy's configuration system, you can add new sections to the config without triggering the config validator. We recommend that you choose a good and unique name for the config section so that multiple extensions to Mopidy can be used at the same time without any danger of naming collisions.